3D Printing Metal Powder
Categories

Compound Chemicals

Molybdenum Silicide (MoSi2)-Powder
  • Molybdenum Silicide (MoSi2)-Powder

Molybdenum Silicide (MoSi2)-Powder

Molybdenum disilicide , an intermetallic compound, a silicide of molybdenum, chemical formula MoSi2, submicron and nanopowder forms may be considered for industrial and application purpose. The appearance of Molybdenum Silicide is gray black powder. It mainly applied for temperatures up to 1800 °C, in electric furnaces used in laboratory.
Send Inquiry
Molybdenum Silicide (MoSi2)-Powder introduce:

About Molybdenum Silicide:

Molybdenum disilicide (MoSi2, or molybdenum silicide) with CAS 12136-78-6, an intermetallic compound, a silicide of molybdenum, is a refractory ceramic with primary use in heating elements. It has moderate density, melting point 2030 °C, and is electrically conductive. At high temperatures it forms a passivation layer of silicon dioxide, protecting it from further oxidation. The thermal stability of MoSi2 alongside its high emissivity make this material, alongside WSi2 attractive for applications as a high emissivity coatings in heat shields for atmospheric entry. MoSi2 is a gray metallic-looking material with tetragonal crystal structure (alpha-modification); its beta-modification is hexagonal and unstable.

Specifications and properties of Molybdenum Silicide:

Chemical formula:MoSi2
Molar mass:152.11 g/mol
Appearance: gray metallic solid
Density:6.26 g/cm3
Melting point:2,030 °C (3,690 °F; 2,300 K)
Crystal structure:Tetragonal


Application of Molybdenum Silicide:

Molybdenum disilicide heating elements can be used for temperatures up to 1800 °C, in electric furnaces used in laboratory and production environment in production of glass, steel, electronics, ceramics, and in heat treatment of materials. While the elements are brittle, they can operate at high power without aging, and their electrical resistivity does not increase with operation time. Their maximum operating temperature has to be lowered in atmospheres with low oxygen content due to breakdown of the passivation layer.

Other ceramic materials used for heating elements are e.g. silicon carbide, barium titanate, and lead titanate composite materials.

Molybdenum disilicide is used in microelectronics as a contact material. It is often used as a shunt over polysilicon lines to increase their conductivity and increase signal speed.


Storage Condition of Molybdenum Silicide Powder:

Damp reunion will affect Molybdenum Silicide powder dispersion performance and using effects, therefore,Molybdenum Silicide Powder should be sealed in vacuum packing and stored in cool and dry room, the Molybdenum Silicide Powder can not be exposure to air. In addition, the Molybdenum Silicide powder should be avoided under stress.


Packing & Shipping of Molybdenum Silicide Powder:

We have many different kinds of packing which depends on the Molybdenum Silicide Powder quantity.

Molybdenum Silicide Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Molybdenum Silicide Powder shipping:could be shipped out by sea , by air, by express as soon as possible once payment receipt.

packing.png


Hot Tags: Molybdenum Silicide (MoSi2)-Powder, manufacturers, suppliers, factory, Customized
  • MSITE CODEhttps://m.kmpass.com/